Our Products

BENZi 100 Etching Primer

One Pack Epoxy Etching Primer


BENZi 100 ETCHING PRIMER is a unique single pack fast drying epoxy etching primer which has excellent adhesion onto non-ferrous metals such as galvanized iron, aluminium, stainless steel and light alloys. It can be subsequently over-coated with a wide range of finishings such as alkyd, acrylic, epoxy, polyurethane, etc. It is used as an adhesion promoting primer over non-ferrous metals before application of topcoats onto the substrate.

 
Painting System:
Substrate
Primer  ( 1 coat )
Intermediate  ( 1 coat )
Topcoat  ( 1 - 2 coats )
Non-Ferrous Metal 
BENZi 100 Etching Primer
BLUE-i Undercoat
BAOMA Gloss, Satin Enamel, Woodcolor / BLUE-i Gloss 6600 / BRUSH & ROLLER Gloss 9000 / BENZi Gloss, BENZITOP ATC 200
Non-Ferrous Metal 
BENZi 100 Etching Primer
BENZi Micaceous Iron Oxide
BAOMA Gloss, Satin Enamel, Woodcolor / BLUE-i Gloss 6600 / BRUSH & ROLLER Gloss 9000 / BENZi Gloss, BENZITOP ATC 200
Non-Ferrous Metal 
BENZi 100 Etching Primer
BENZi Micaceous Iron Oxide
BENZi Micaceous Iron Oxide
Non-Ferrous Metal 
BENZi 100 Etching Primer
BENZIPOX Mastic 88 or BENZITHANE 300
BENZITHANE 300

1 litre, 5 litres & 15 litres

Surface Preparation

New Non-Ferrous Metal
Surface generally must be clean, free from oil, grease, dust and other contaminants and must be thoroughly dried before application. Layer of oil / grease on the substrate's surface must be thoroughly removed using suitable solvent degreasing agent.

Old / Existing Unpainted Non-Ferrous Metal
Ensure the aged non-ferrous metal is free from rust and residue of 'zinc salt'. Any spot rusty area shall be make good with suitable zinc rich primer or presence of 'zinc salt' residue on the substrate's surface shall be removed by power brushing before priming of BENZi 100 Etching Primer.

 
Color :  Canvas Grey, refer BENZi High Performance Coating color card
Film Finish :  Soft Matt
Touch Dry :  15 minutes (depends on temperature and humidity)
Recoating Interval :  Minimum 4 hours
Solid Content :  20% (by weight); 10% (by volume)
Dry Film Thickness :  5 - 10 microns / coat
Theoretical Coverage :  10 - 20 m2 / liter / coat (actual coverage is dependent on loss factors)
No. of Coat :  1 coat
Application :  Brush, roller, air spray or airless spray
Thinning :  Use Thinner for dilution, dilute up to 5% Thinner if necessary
Cleaning Up :  Clean all paint equipment with Thinner immediately after use

 

Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details. 

Materials Safety Data Sheet (MSDS) is available upon request.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
BENZi High Performance Coating

 

SUBSCRIBE TO NEWSLETTER