Our Products

BAOMA Satin Enamel

100% Alkyd Satin Sheen Enamel

Features & Benefits

Excellent Color Retention
Longer-lasting colors that keeps your home looking fresh and vibrant longer compared to other enamel paint.

Optimized Drying Time  
Enhances proper drying between each coat to ensure satin-like smooth finish and tough paint film.

Weather Resistance 
Provides outdoor durability for wood and metal against harsh weather.

Fungus Resistance
Prevent unsightly growth of surface fungus on painted substrates.

Low Odor
No unpleasant smell during and after paint application, making your home ready for occupancy almost immediately.

Water Resistance
Prevent moisture absorption for prolonged substrate usage life.

MCI BAOMA Satin Enamel is a premium quality low odor alkyd satin sheen enamel specially developed to withstand the most severe condition of tropical climate. It is made of long oil alkyd with superior light-fastness pigments. This enamel has excellent color retention, anti-fungus and water resistance, making it suitable for long term decoration and protection of metal and wood surfaces for both exterior and interior use.

Painting System:
Primer  ( 1 coat )
Intermediate  ( 1 coat )
Topcoat  ( 2 coats )
BENZi Aluminium Paint
BLUE-i Undercoat
BAOMA Satin Enamel
Ferrous Metal 
BENZi Red Oxide Primer or Zinc Phosphate Primer
BLUE-i Undercoat
BAOMA Satin Enamel
Non-Ferrous Metal 
BENZi 100 Etching Primer 
BLUE-i Undercoat
BAOMA Satin Enamel

1 litre, 5 litres & 15 litres

Surface Preparation

New Ferrous Metal / Wood
Surface generally must be clean, free from rust, oil, grease, dust and other contaminants and must be thoroughly dried before application. Steel surface shall be manually wire brush or power tool cleaning to remove all rust or loose millscale as to comply with minimum Swedish Standard ST 3, then primed with appropriate anti-corrosion primer follow by undercoat before application of topcoat. Wood surface shall be sand down to smoothen the surface, then primed with aluminium wood primer follow by undercoat before application of topcoat.

Previously Painted Ferrous Metal / Wood
Previously painted surface should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any loose and flaking paint film must be scraped off, rust should be thoroughly removed. The entire surface must be dry and free from dust, grease and other contaminants, spot-primed any surface imperfection with appropriate primer / undercoat before application of topcoat.

Non-Ferrous Metal 
For new surface, thorough solvent degreasing to SSPC-SP1 is necessary. For old surface, it must be abraded to remove corrosion deposits. All surfaces must be dry and clean prior to painting.

Color :  Assorted colors, refer Color Infinity color card
Film Finish :  Satin Sheen
Touch Dry :  2 hours (depends on temperature and humidity)
Recoating Interval :  Minimum 6 hours
Theoretical Coverage :  13 – 16 m2 / liter / coat (actual coverage is dependent on loss factors)
No. of Coat :  Minimum 2 coats (depends on color)
Application :  Brush, roller, air spray or airless spray
Thinning :  Use White Spirit or Turpentine for dilution, dilute up to 5% if necessary
Cleaning Up :  Clean all paint equipment with White Spirit or Turpentine immediately after use

Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details. 

Materials Safety Data Sheet (MSDS) is available upon request.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
Color Infinity