Our Products

BRUSH & ROLLER Ecoshield

Modified Acrylic Exterior Wall Finish

Features & Benefits

Algae Protection  
Ensure lasting protection against algae in tropical climate. 

Dirt Resistance
Resists dirt pick-up from the environment and easily washed away by rain.

Weather Resistance
Provides outdoor durability against harsh weather.

Good Hiding & Easy-To-Apply
Provides effortless application with smooth finish.

Water Resistance
Prevent moisture absorption for prolonged substrate usage life.

APEO, Formaldehyde & Heavy Metal FREE 
Without causing toxic effects in humans or contaminating food chains. 
Low VOC  
Helps preserve the environment.

BRUSH & ROLLER Ecoshield is a water-based modified acrylic paint for exterior application on plastered wall, concrete, brick, gypsum board & etc. It provides adequate outdoor durability against tropical climate. It is a specially designed green product that has less of an environmental impact & less detrimental to human health. It is anti-algae, water resistant, good hiding & easy-to-apply, having dirt resistance property, making it ideal to be used in repainting works or housing projects where budget is of major concern.

Painting System:
Sealer / Primer  ( 1 coat )
Topcoat  ( 2 coats)
New Masonry
BAOMA  Excila 1900, Excila 1000 / BLUE-i Sealer 550

Previously Painted  Masonry

BAOMA Excila 1000 / BLUE-i Sealer 550 /
BRUSH & ROLLER Ecosealer 5400

1 litre, 5 litres & 18 litres


Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen or algae must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Apply BAOMA Excila 1900 / Excila 1000 / BLUE-i Sealer 550 / BRUSH & ROLLER Ecosealer 5400 where high alkalinity is present. Avoid painting where surface is high in moisture content or during wet weather (recommended painting specification requires moisture content of the wall to be below 16% as measured by protimeter and alkalinity of the wall below pH9).

Color :  Assorted colors, refer Color Infinity color card
Film Finish :  Low Sheen
Touch Dry :  30 minutes (depends on temperature and humidity)
Recoating Interval :  2 hours
Theoretical Coverage :  12 - 14 m² / litre / coat (actual coverage is dependent on loss factors)
No. of Coat :  Minimum 2 coats (depends on color)
Application :  Brush, roller, air spray or airless spray
Thinning :  Use clean water, dilute up to 5% of water if necessary


Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.
Materials Safety Data Sheet (MSDS) is available upon request.
Hazard Statement:  This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
Color Infinity