Our Products

BENZIPOX Organic Zinc Rich Primer

Two Pack Epoxy (Organic) Zinc Rich Primer

BENZIPOX ORGANIC ZINC RICH PRIMER is a two pack epoxy zinc rich primer to be used on abrasive blasted steel surface (Sa 2.5) before overcoated with a wide range of high performance coatings. An ideal paint where high level of corrosion resistance is required. It has good resistance to abrasion and mechanical damage. For damaged galvanised steelworks, it is ideal as a touch-up primer and can be applied by brush or roller.

Painting System:
Primer  ( 1 coat )
Intermediate  ( 1 coat )
Topcoat  ( 1 - 2 coats )
Ferrous Metal 
BENZIPOX Organic Zinc Rich Primer
BENZIPOX Mastic 88
BENZIPOX Mastic 88 (Interior Use) or BENZIPOX 280 (Interior Use) or BENZITHANE 300 (Exterior & Interior)

5 litres

Surface Preparation:

Ferrous Metal Surface
For optimum performance, steel surface shall be abrasively blasted in accordance to Swedish Standard Sa 2.5. If abrasive blasting is impossible, mechanical cleaning to St 3 is essential. If oxidation occurred on the blasted steel before application of paint, it is necessary to reblast the steel. The surface must be dry and free from any abrasive residues, dirt, grease and other contaminants prior to painting.

Mixing Ratio (By Volume) :  4 : 1  (Base : Hardener)
Color :  Dark Grey, refer BENZi High Performance Coating color card
Film Finish :  Soft Matt
Touch Dry :  10 minutes (depends on temperature and humidity)
Recoating Interval :  Minimum 4 hours
Solid Content :  70% (by weight); 50% (by volume)
Dry Film Thickness :  25 - 75 microns / coat
Theoretical Coverage :  20 m2 / litre / coat  (DFT of 25 microns);  7 m2 / litre / coat  (DFT of 75 microns)
No. of Coat :  1 coat
Application :  Brush, roller, air spray or airless spray
Thinning :  Use Thinner for dilution, dilute up to 5 - 10% if necessary
Cleaning Up :  Clean all paint equipment with Thinner immediately after use


Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details. 

Materials Safety Data Sheet (MSDS) is available upon request.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
BENZi High Performance Coating

Related Products