Our Products

BENZi Roadline Paint 5000

Fast Drying Solvent Based Roadline Paint

Features & Benefits

Certified to: MS 164:2007
License No. : PC011917

BENZi ROADLINE PAINT 5000 is a high performance solvent based modified alkyd roadline paint. It is used as traffic line marking as to enhance road traffic safety. It is abrasion resistant, fast drying, good hiding and having excellent adhesion property; suitable for exterior and interior application on concrete and bitumen surfaces such as traffic road, pedestrian crossing, car park, factory, warehouse & etc. Available in reflective type and non-reflective type for choice.

Approved by SIRIM to Malaysian Standard MS 164:2007, Licence No: PC011917

Painting System:
Primer  ( 1 coat )
Topcoat  ( 2 coats)
New Surface
Not Necessary
BENZi Roadline Paint 5000
Previously Painted Surface
Not Necessary
BENZi Roadline Paint 5000

5 litres

Surface Preparation

New Surface: Ensure the surface to be painted is dried thoroughly, free from dirt, dust, grease and other contaminants. Avoid painting where high alkalinity is present or moisture content is high. Recommended painting specification requires moisture content of the substrate is below 16% (tested with Protimeter) and alkalinity below pH9.

Previously Painted Surface: Remove all loose paint films, powdery residues, algae and fungus, by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Ensure the surface is thoroughly dried, free from dirt, dust, grease and other contaminants prior painting.


Color :  Assorted colors, refer BENZi High Performance Coating color card
Film Finish :  Low Sheen (available in reflective and non-reflective type for choice)
Touch Dry :  20 - 30 minutes (depends on temperature and humidity)
Recoating Interval :  Minimum 1 hour
Solid Content :  70% (by weight); 50% (by volume)
Dry Film Thickness :  50 - 60 microns / coat
Theoretical Coverage :  8 - 10 m2 / liter / coat (actual coverage is dependent on loss factors)
No. of Coat :  Minimum 2 coats
Application :  Brush or roller
Thinning :  Use White Spirit or Turpentine for dilution, dilute up to 5% if necessary
Cleaning Up :  Clean all paint equipment with White Spirit or Turpentine immediately after use


Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details. 

Materials Safety Data Sheet (MSDS) is available upon request.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
BENZi High Performance Coating

Click link below to download
SIRIM Certification