Surface Preparation

New Wood Surface
Ensure the surface to be painted is clean, dry and free from dust, oil, grease, fingerprints and other contaminants. Pre-sanding of the wood with suitable sandpaper is recommended in order to reduce grain raising and improve adhesion. If necessary, fill the wood grains with appropriate filler and smoothen with sandpaper and dusted off. For best finishing result, priming of one coat BAOMA Woodpaque Primer is recommended before over-coating with BAOMA Woodpaque. Repeat the step of applying one coat, ensure fully dried, then sanded smooth and dusted off, followed by subsequent coat.

Previously Painted Wood Surface
Remove all unstable paint film, dust, oil, wax and other foreign matters. Presence of defective materials on substrate will affect the drying and adhesion of BAOMA Woodpaque. If the previous paint film is in sound condition and without wax, smoothen it with sandpaper, clean off and dry before application of topcoat.
 

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.
                             
Materials Safety Data Sheet (MSDS) is available upon request.
                                                                          
Hazard Statement:  This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)