Our Products

BAOMA Shield Flexicool

Elastomeric Heat Reflective Exterior Wall Finish


Features & Benefits

 
 
10 Years Performance  
Lasting better than others in its class.

 
2x Dirt Resistance
Advanced binder technology resists dirt pick-up from the environment and easily washed away by rain that keeps your         home looking clean most of the times.
 
Flexicool Technology
Flexible to cover hairline cracks & reduces exterior surface temperature.

 
2x Algae Protection (Encapsulated Tech)  
Ensure long lasting protection against algae and fungus in tropical climate. 

 
2x UV Protection 
Longer lasting colors that keeps your home looking fresh and vibrant.

 
Water Resistance
Prevent moisture absorption for prolonged substrate usage life.

 
Low VOC  
Helps preserve the environment.

 
APEO, Formaldehyde & Heavy Metal FREE 
Without causing toxic effects in humans or contaminating food chains. 
 
BAOMA Shield Flexicool is an ultra-premium quality water-based elastomeric acrylic paint formulated with superior light-fastness pigments that gives optimum outdoor durability against harsh tropical climate. Its innovative Flexicool technology enables the paint-film, not only to elongate up to 3x as to cover hairline cracks & provides waterproofing protection, but also reduces exterior surface temperature by up to 5°C, results in energy saving to cool your home. It has excellent resistance to algae and fungus growth and withstands alkali on plastered wall, having superior dirt resistance & excellent UV protection, making it the ultimate choice for long term decoration and protection of exterior plastered wall, concrete, brick, gypsum board etc.

 
Painting System:
Substrate
Sealer / Primer  ( 1 coat )
Topcoat  ( 2 coats)
New Masonry

BAOMA Freshcon Primer 1500, Chameleon Primer 2000, Excila 1900
BAOMA Shield Flexicool
Previously Painted  Masonry
BAOMA Chameleon Primer 2000, Excila 1900, Excila 1000.
BAOMA Shield Flexicool

1 litre, 5 litres & 15 litres

Surface Preparation

Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high-pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Apply BAOMA Chameleon Primer 2000 / Freshcon Primer 1500 / Excila 1900 / Excila 1000 where high alkalinity is present.

For optimum 10 years performance, priming of 1 coat BAOMA Freshcon Primer 1500 is compulsory before over-coating with 2 coats BAOMA Shield Flexicool. Avoid painting where surface is high in moisture content or during wet weather (recommended painting specification requires moisture content of the wall to be below 16% as measured by protimeter and alkalinity of the wall below pH9).

 
Color :  Assorted colors, refer Color Infinity color card
Film Finish :  Mid Sheen
Touch Dry :  30 minutes (depends on temperature and humidity)
Recoating Interval :  2 hours
Theoretical Coverage :  10 - 12 m² / litre / coat (actual coverage is dependent on loss factors)
No. of Coat :  Minimum 2 coats (depends on color)
Application :  Brush, roller, air spray or airless spray
Thinning :  Use clean water, dilute up to 5% of water if necessary

 

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.
                             
Materials Safety Data Sheet (MSDS) is available upon request.
                                                                          
Hazard Statement:  This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
Color Infinity

SUBSCRIBE TO NEWSLETTER